{"product_id":"ghost-note-audio-inversions-fuzz-pedal","title":"Ghost Note Audio - Inversions (Fuzz Pedal)","description":"\u003csection id=\"shopify-section-template--29353845227902__main\" class=\"shopify-section section\"\u003e\n\u003csection id=\"MainProduct-template--29353845227902__main\" class=\"page-width section-template--29353845227902__main-padding\" data-section=\"template--29353845227902__main\"\u003e\n\u003cdiv class=\"product product--medium product--left product--stacked product--mobile-hide grid grid--1-col grid--2-col-tablet\"\u003e\n\u003cdiv class=\"product__info-wrapper grid__item scroll-trigger animate--slide-in\"\u003e\n\u003cdiv class=\"product__description rte quick-add-hidden\"\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInversions is our take on the famed Big Muff tone - but with a big twist.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInstead of the traditional NPN transistor stages, Inversions uses CMOS inverters to build up its gain stages - the same chip used in the Sunn Beta Lead. This gives the pedal a sound that lies somewhere between the traditional, fuzzy tone of the Big Muff and the thicker, angrier sound of the Beta Lead.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe familiar three-knob layout is retained, with the addition of a \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eMode\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e switch that changes the character of the tone circuit. One setting provides a modified, mid-scooped Big Muff tonestack, while the other switches to a more mid-forward, low-pass response, inspired by the style of tone control used in the Rat.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFor flexible integration into different rigs, the pedal also supports both \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003etrue bypass\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e and \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ebuffered bypass\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, selectable using a dedicated switch on the underside of the enclosure.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e3-stage CMOS distortion circuit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTone control circuit with two modes\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSwitchable true bypass or buffered bypass circuitry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSoft-touch footswitches that persist state, even when disconnected from power\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eExternal control input for operating the pedal with a controller \/ channel switcher\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSolid steel construction with durable powder coating.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003csection id=\"shopify-section-template--29353845227902__custom_liquid_rhk4Kh\" class=\"shopify-section section\"\u003e\n\u003cdiv class=\"color-background-1 gradient\"\u003e\n\u003cdiv class=\"section-template--29353845227902__custom_liquid_rhk4Kh-padding\"\u003e\n\u003ch1 class=\"novideo\"\u003eVideo coming soon...\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection id=\"shopify-section-template--29353845227902__multicolumn_video_dirMin\" class=\"shopify-section section\"\u003e\u003c\/section\u003e\n\u003csection id=\"shopify-section-template--29353845227902__page_agBgjg\" class=\"shopify-section section\"\u003e\n\u003cdiv class=\"color-background-1 gradient\"\u003e\n\u003cdiv class=\"page-width page-width--narrow section-template--29353845227902__page_agBgjg-padding\"\u003e\n\u003cdiv class=\"rte scroll-trigger animate--slide-in\"\u003e\n\u003ch1\u003eControls\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume\u003c\/strong\u003e - Controls the output signal amplitude.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTone \u003c\/strong\u003e- Adjusts the tonestack \/ low-pass filter, setting the balance of treble and bass frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain \u003c\/strong\u003e- Master gain knob.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode Switch\u003c\/strong\u003e - Switches between two tone control circuits.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eActive Footswitch\u003c\/strong\u003e - Enables or bypasses the pedal entirely.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass Mode \u003c\/strong\u003e(bottom of the pedal) - Sets the operation of the pedal when in bypass mode. Choose between true bypass or buffered bypass.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch1\u003eDetails\u003c\/h1\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInversions maintains the same circuit topology as the original Big Muff, but uses CMOS 4049 inverter chips as its primary building blocks, as opposed to NPN transistors (or op amps in the Op-Amp Muff). The inverters impart their own unique sound and distort very differently from transistors, producing a smoother, thicker distortion that is fuller and less fuzzy than the original.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe original pedals had a very scooped-sounding tone stack, removing a lot of the mid-frequency content from the output signal. We wanted to give players the choice between a slightly more refined version of the original tone control and a more straightforward low-pass filter, similar to what is found on a RAT.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eNote: the two modes do have a difference in output volume, so when toggling between them, you will need to adjust the volume knob as well to maintain the same loudness.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eChoose your bypass operation by adjusting the slide switch on the bottom of the pedal. Use a small flathead screwdriver or a toothpick to carefully push the switch up or down.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIn true bypass mode, the circuit is disconnected from the signal path when the pedal is bypassed. If power is disconnected from the pedal, the signal will still flow directly from input to output. This has its benefits when it comes to maintaining signal integrity and minimizing issues on large pedalboards, but it comes at the expense of noisier switching operation, where a faint \"pop\" sound can be heard when the pedal is engaged or bypassed.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUsing a buffered bypass method means this pop is almost completely eliminated, as no physical contacts are being engaged or disconnected. A buffer in the signal chain can also be beneficial in certain scenarios, as it counteracts treble roll-off when using long instrument leads and provides a stronger signal for other pedals downstream.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWe offer you the choice of either method so that you can integrate the pedal into your system in the best possible way.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe pedal can be controlled using an external switch connected via a 1\/4\" TRS connector. Both footswitches can be toggled using the external switching system.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch1\u003eTechnical Specs\u003c\/h1\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Requirement\u003c\/strong\u003e: 9V DC, 100mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connector\u003c\/strong\u003e: 2.1mm center-negative barrel jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExternal Switching\u003c\/strong\u003e: 1\/4\" TRS connection. \"Short to ground\" operation.\n\u003cul\u003e\n\u003cli\u003eTip: Active Footswitch\u003c\/li\u003e\n\u003cli\u003eRing: Not used\u003c\/li\u003e\n\u003cli\u003eSleeve: Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eInput Impedance: \u0026gt;1MΩ\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOutput Impedance: 1kΩ\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass circuit\u003c\/strong\u003e: Buffered bypass or True Bypass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFootswitch mechanism\u003c\/strong\u003e: Momentary, soft-touch, relay control.\n\u003cul\u003e\n\u003cli\u003eFootswitch state is stored and recalled even when the pedal is disconnected from power.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions\u003c\/strong\u003e: 83mm (W) 125mm (D) 55mm (H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (with packaging)\u003c\/strong\u003e: 126mm (W) 146mm (L) 67mm (H)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","brand":"Ghost Note Audio","offers":[{"title":"Default Title","offer_id":50720019513378,"sku":"GN-INV","price":309.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0808\/1653\/7634\/files\/Inversions-1_jpg.webp?v=1790581491","url":"https:\/\/globalmusicimports.com.au\/products\/ghost-note-audio-inversions-fuzz-pedal","provider":"Global Music Imports - Australia","version":"1.0","type":"link"}