60+ Hotone original effects
460+ amp, cab and effect models on Ampero II and II Stage. Includes 60+ Hotone originals across drive, dynamics, filters, modulation, delay and reverb.
Capture the tone. Own the stage.
Native NAM A2 Lite. Original Hotone effects. Studio-to-stage power, built into Ampero II.
NAM captures.
Beyond factory tones.
Load compatible NAM A2 Lite amp captures natively on Ampero II, II Stage or II Stomp. Find the sound. Take it to the stage without a computer.
Captures recreate gear at particular settings. Shape your preset with effects and cabinet processing as DSP capacity allows.
Firmware + editors ↗Choose your capture
Clean sparkle, edge-of-breakup grit or crushing gain. Start with a compatible capture.
Load NAM natively
Supported NAM A2 Lite files run directly on Ampero II, II Stage and II Stomp.
Make it stage-ready
Add effects. Shape the routing. Save your sound.
NAM compatibility is model-specific. Native A2 Lite requires Ampero II firmware 1.4.0+, II Stage 1.7.0+ or II Stomp 2.5.0+. Original Ampero, Ampero One and Ampero Mini support A2 conversion through Ampero Editor 1.6.0+, rather than native A2 Lite loading. Compatible files and DSP limits apply.
Ampero II.
Capture. Create. Perform.
Build around a NAM capture. Add drive, modulation, delay and reverb. Take the same rig from headphones to the stage.
Ampero II StageEight switches.
Eight switches.
Five scenes.
One complete rig.
Native NAM A2 Lite, a 5-inch touchscreen and eight footswitches. Switch effects and parameters across five scenes per preset, from clean verse to soaring solo.
See Ampero II Stage
Dual chains. Stereo routing.
Blend parallel paths. Integrate your pedals through the stereo loop. Run up to 12 modules when DSP capacity allows.
Record dry. Reamp later.
Record dry and processed tracks through the Ampero II family’s 8-in/8-out USB interface. Keep the take. Reamp the tone.
Capture your own amps and pedals.
Tone Catch on Ampero II and II Stage captures compatible gear into the processor. Keep a favourite sound or share it through Hotone’s community. NAM loading adds a separate library of compatible captures.
Loop it. Reverse it. Make it yours.
Ampero II and II Stage offer 60-second stereo looping with undo/redo, half-speed and reverse. Turn one phrase into the next idea.
Choose your Ampero.
Ampero II
Built-in expression, 5-inch touchscreen, native NAM A2 Lite and USB recording.
See Ampero IIAmpero II Stage
Eight footswitches, XLR outputs, Bluetooth app control and native NAM A2 Lite.
See Ampero II Stage
Ampero II Stomp
Native NAM A2 Lite, dual chains and USB recording. A stereo loop keeps your favourite pedals in the rig.
See Ampero II Stomp
Ampero Mini, One and original
Different sizes. More ways to play. Mini, One and original Ampero support editor-based NAM A2 conversion; the II family loads A2 Lite natively.
Shop the Ampero family
Pulze.
Practice turned up.
Amp models, effects, Bluetooth backing tracks and USB recording. Pulze and Pulze Mini add NAM A2 conversion through the compatible app.
Pulze
30W stereo. Dual 3.5-inch speakers. A 4-inch touchscreen to dial it in, plus USB recording.
See Pulze
Pulze Jr.
20W stereo, rechargeable power and SoundClone/NAM support. Layer ideas with a 240-second mono looper and 100 drum rhythms.
See Pulze Jr.
Pulze Mini
5W, rechargeable and just 368g. Bluetooth backing tracks and USB recording, ready to travel.
See Pulze MiniPulze and Pulze Mini support NAM A2 conversion through Pulze app 2.0.2 or later. This differs from native A2 Lite loading on Ampero II devices. Pulze Jr. is currently listed for preorder; see its product page for the latest arrival information.
Reverb you can clone. Pitch you can play.
Verbera
Clone a space. Freeze the moment.
Clone a reverb into your own IR. Blend convolution with the XR engine, shape the envelope and freeze the XR tail into a sustained layer. Analog dry-through preserves your dry signal’s analog path.
See Verbera
Freqlux
Three voices. Moving harmonies.
Run three pitch voices at once. Shape each voice, choose PolyShift, KeyTrack, Detune, ARP or Mod Only, then trigger pitch glides with Flux. Add expression or MIDI for hands-free changes.
See FreqluxControl the whole rig.
Change presets. Sweep parameters. Control multiple devices. Keep your hands on the guitar.
Ampero Control
Four switches. 5-pin, USB and Bluetooth MIDI. Send multiple messages with one press.
See Ampero Control ↗Pulze Control
Rechargeable wireless MIDI control for compatible Pulze products and Ampero II Stage.
See Pulze Control ↗
Ampero II Press
Expression control with a toe switch for compatible processors.
See Ampero II Press ↗
Ampero Switch
Two compact momentary switches for extra control on compatible devices.
See Ampero Switch ↗Shop Hotone.
Hotone questions.
Which Ampero should I choose?
II: built-in expression. II Stage: eight-switch control. II Stomp: compact pedalboard integration. All three load compatible NAM A2 Lite natively. Mini, One and original Ampero use editor-based A2 conversion.
Does every NAM file load natively?
Ampero II devices load supported A2 Lite files natively. Original Ampero, One and Mini use editor-based conversion. Check Hotone firmware notes for formats and processing limits.
Can Pulze run on a battery?
Mini and Jr. are rechargeable. The original 30W Pulze uses an external supply. Runtime varies with use.
Will a controller work with my rig?
Match the device’s MIDI or external-control support, connector and power requirements. Bluetooth audio does not guarantee Bluetooth MIDI. GMI can help.